We’ve spent years with the iPhone, and discovered countless tips and tricks to get the most out of it, but it’s always good to know the basics. Something everyone needs to know is how to reset an iPhone. The steps were exactly the same on every device up until the iPhone 6S Plus, but things changed a little with the release of the iPhone 7 and 7 Plus and then changed again with the iPhone X.
If you upgraded from a previous iPhone model to the iPhone 8 or the latest iPhone XS Max, but have never needed to reset it, you may be at a loss as to how to begin the process. Don’t worry, we’re here to explain how to reset your iPhone, when you should restart it, and how to force a restart when your phone is not responding. We also lay out the differences between a restart, a soft reset, and a factory reset.
How to reset your iPhone (soft reset)
The easiest way to reset your iPhone is the inverse of turning it on. This method is often referred to as a “soft reset,” meaning you won’t lose any data and nothing will be deleted from your phone. The best time to perform a soft reset is when your phone is running a bit slower than usual, an app isn’t opening or working properly, or some other relatively small problem has occurred, but your iPhone is still responsive.
Step 1: Press and hold the Sleep/Wake button until the Slide to Power Off slider appears. On the iPhone 6 and later models, you’ll find the Sleep/Wake button on the right side of the phone. On the iPhone SE, iPhone 5S, and earlier models, the Sleep/Wake button is found on the top.
Step 2: Rest your finger on the slider, then swipe to the right.
Step 3: Once there is nothing on the screen and it goes black, press and hold the Sleep/Wake button again until the Apple logo appears.
Alternatively, provided you have iOS 11 or later installed, you can go to General > Settings and scroll to the bottom where you’ll find Shut Down. When you tap Shut Down, you will see the Slide to Power Off slider. You can then proceed to Step 2 above.
How to force reset your iPhone
Another way to reset your iPhone is to do what Apple officially calls a “Force Restart.” Once again, no important data will be lost. A “force restart” is recommended when your iPhone is completely unresponsive. Examples of this include times when your iPhone’s screen turns black (despite it being powered on), the screen freezes, or your iPhone encounters an issue during startup.
The exact way to perform a force restart differs between older iPhone models and the iPhone 7 and later. Instead of a traditional Home button, the newer iPhones have a Home/Touch ID sensor, which isn’t used to trigger a force restart, and, as we discussed in our iPhone X features rundown, Apple did away with the Home/Touch ID sensor in the iPhone X entirely in favor of the new Face ID.
On the iPhone 8, 8 Plus, iPhone X, XS, XS Max, and XR
Step 1: Press and quickly release the Volume Up button.
Step 2: Press and quickly release the Volume Down button.
Step 3: Press and hold the Sleep/Wake button until you see the Apple logo.
On the iPhone 7 and 7 Plus
Step 1: Press and hold the Sleep/Wake and Volume Down buttons until the Apple logo appears.
On the iPhone 6S and earlier
Step 1: Press and hold the Sleep/Wake and Home buttons together until the Apple logo appears.
What do you do if a restart doesn’t work? Use Force Restart to enter DFU mode
DFU stands for Device Firmware Update. This mode will allow the iPhone to interact with iTunes without loading the operating system. If your iPhone’s operating system is in a state of failure, where you really can’t do anything with your phone and the iPhone is completely unresponsive, entering DFU mode should enable you to restore it. This process will delete everything you had on your device, but sometimes that’s the only way to bring your iOS device back to life. Hopefully, you followed our guides on how to backup your iPhone, with or without iTunes, so that you can recover your data after you erase your iPhone.
Here’s how to enter DFU mode.
For iPhone 7 and later
Step 1: Connect your iPhone to your computer and open iTunes.
Step 2: Perform a Force Restart by holding down the Sleep/Wake button and the Volume Down button at the same time for 10 seconds.
Step 3: Let go of the Sleep/Wake button.
Step 4: Keep holding down the Volume Down button for an additional 10 seconds.
Step 5: Your iPhone’s screen should remain black.
Step 6: You will see a message on your computer screen saying iTunes has detected an iPhone in recovery mode.
Step 7: Click OK on this message to begin restoring your iPhone.
For iPhone 6s and earlier
Step 1: Plug in your iPhone to your computer and open iTunes.
Step 2: Perform a Force Restart by holding down the Sleep/Wake button and the Home button at the same time for eight seconds.
Step 3: Let go of the Sleep/Wake button.
Step 4: Keep holding down the Home button.
Step 5: You will see a message on your computer screen saying iTunes has detected an iPhone in recovery mode.
Step 6: Click OK on this message to begin restoring your iPhone.
What is the difference between a soft reset, a force restart, and a factory reset?
Restarting your iPhone using the software option, or a soft reset, will not result in the loss of any data. The same is true of a force restart, which allows you to use the hardware keys to restart your iPhone when the touchscreen isn’t responsive. A Factory Reset is a completely different beast, however. It essentially reverts your iPhone back to the way it was when it first came out of the box — it wipes all content, settings, and personal information from the device.
We often recommend factory resetting your iPhone as a last resort if you’re having issues that you can’t solve, but it should also be used when you’re trading your iPhone in, giving it to a friend, or if the phone has been lost or stolen. It’s not a permanent process, however, since a previous backup can be used to restore everything that was once on your phone. If you need to perform a factory reset, read our guide on how to factory reset an iPhone, which also includes a breakdown of the reset options found in Settings > General > Reset.